IEEE 802.3 is a collection of IEEE standards defining the physical layer, and the media access control (MAC) sublayer of the data link layer, of wired Ethernet. This is generally a LAN technology with some WAN applications. Physical connections are made between nodes and/or infrastructure devices (hubs, switches, routers) by various types of copper or fiber cable.
802.3 is a technology that can support the IEEE 802.1 network architecture.
The maximum packet size is 1518 bytes, although to allow the Q-tag for Virtual LAN and priority data in 802.3ac it is extended to 1522 bytes. If the upper layer protocol submits a protocol data unit (PDU) less than 46 bytes, 802.3 will pad the data field to achieve the minimum 46 bytes. The minimum Frame size will then always be of 64 bytes.
Although it is not technically correct, the terms packet and frame are often used interchangeably. The ISO/IEC 8802-3 and ANSI/IEEE 802.3 standards refer to MAC sub-layer frames consisting of the destination address, the source address, length/type, data payload, and frame check sequence (FCS) fields. The preamble and start frame delimiter (SFD) are (usually) together considered a header to the MAC frame. This header and the MAC frame constitute a packet.
The original Ethernet is called Experimental Ethernet today. It was developed by Robert Metcalfe in 1972 (patented in 1978) and was based in part on the wireless ALOHAnet protocol. It is not in use anywhere, but is thought to be the only Ethernet by some purists. The first Ethernet that was generally used outside Xerox was the DIX Ethernet. However, as DIX Ethernet was derived from Experimental Ethernet, and as many standards have been developed that are based on DIX Ethernet, the technical community has accepted the term Ethernet for all of them. Therefore, the term Ethernet can be used to name networks using any of the following standardized media and functions.
Reference:
http://en.wikipedia.org/wiki/IEEE_802.3
